CircuitWorks Tacky Flux

Conveniently packaged flux gel formulated for easy BGA rework

CircuitWorks® Tacky Flux is a Type ROL0 formulation designed for BGA rework requiring high-reliability, stability and cleanliness. CircuitWorks Tacky Flux gel composition holds the BGA component in position even with board movement. Its lower viscosity allows easy application and contains no ionic material. CircuitWorks Tacky Flux is suitable for clean room applications.

CircuitWorks Lead-Free Flux is very similar to No-Clean Tacky Flux, but specifically formulated for the higher temperature requirements of lead free applications.

Features & Benefits

  • Syringe applicator provides exact delivery of flux to surface
  • Long tack time, extended shelf life
  • No refrigeration required
  • Excellent consistency with stable viscosity
  • Noncorrosive, halide and halogen free
  • Meets IPC requirements for ROL0, No Clean
  • Conforms to ISO 9454
  • Meets Bellcore TR-NWT-000078 requirements
  • Meets DIN EN 29454-1 1.1.3.C classification
  • RoHS Compliant

Applications

  • Automated BGA applications

Swipe to View Add to Cart Button 

Part # Size Units Per Case Price Per Case Add To Cart
CW8700

Lead-Free - 3.5 g (0.12 oz.) syringe

12 blister cards $243.84
CW8500

No-Clean - 3.5 g (0.12 oz.) syringe

12 blister cards $244.08
Order from an authorized distributor

FAQ's

How do I figure out the shelf life of a product?

The shelf life of a product can be found on either the technical data sheet (TDS), available on the product page, or by looking on the certificate on conformance (COC). The COC can be downloaded by going to https://www.chemtronics.com/coc. Once you have the shelf life, you will need to add it to the manufacture date for a use-by date. The manufacture date can be identified by the batch number. The batch code used on most of our products are manufacture dates in the Julian Date format. The format is YYDDD, where YY = year, DDD = day. For example, 19200 translates to the 200th day of 2019, or July 19, 2019. This webpage explains and provides charts to help interpret our batch numbers: https://www.chemtronics.com/batch-codes.

Do you need to clean flux?



Yes, flux should be cleaned off of a printed circuit board (PCB) after soldering is completed. The following are the reasons to remove flux residues:

  • Improve Aesthetic Appearance of PCB - If you are a contract manufacturer of PCB’s, the visual appearance of the board reflects on your work. A clear, greasy-looking residue around a solder joint may raise flags for your customer’s incoming QC inspectors. If the flux residue chars and forms spots on the solder joints, it may look like a true defect like a solder joint void or “blow hole”. If the flux residue is from a rework process, it acts as a fault tag in the rework area, calling attention to the work even if there shouldn’t be a concern.
  • Improve Reliability of PCB - Reliability requirements are generally driven by the nature of the final product. For a disposable product like a computer keyboard, nobody loses their life if it stops working. In that case, an EMS supplier may use no-clean flux and forgo the cleaning process. On the other end of the scale, requirements for pacemaker electronics, where board failure could directly lead to death, are going to be much stricter. In that example, cleaning will be required after assembly and any subsequent rework, and the process will be thoroughly tested for effectiveness and repeatability. Long-life durable goods may fall somewhere in-between, with cleaning a requirement, but without the rigid testing and controls.
  • Prevent Corrosion on Components and PCB - Flux residues left on electronic circuit boards are acidic. If they aren’t removed with a cleaning process, the residues can draw in ambient moisture from the air and lead to corrosion of component leads, and PCB contacts.
  • Avoid Adhesion Problems with Conformal Coating - Most people understand that when painting something, the surface must be prepared so it is absolutely clean. Otherwise, the paint will quickly lift off the surface and peel off. The same logic applies to conformal coating, even when the contamination is from no-clean flux. “No-clean” refers to the amount of ionic material left after soldering. It has nothing to do with whether or not coating can stick to it. When there are flux residues left on the PCB before the coating process, it is common to see the coating lift or delaminate from the surface of the board. This is evident when the pockets are isolated around solder joints rather than the overall surface (the exception being the bottom of a wave soldered PCB). To make matters worse, coatings are generally semi-permeable, so breathe to a certain extent. Moisture can enter and soak into the flux residue, and potentially lead to corrosion.
  • Prevent Dendritic Growth from Ionic Contamination - Polar or Ionic particles left from flux residue and other sources, when exposed to moisture from the ambient air and when current is applied, can link into a chain or branch called a dendrite. These dendrites are conductive, so form an unintended trace that cause current leakage or, over a longer period of time, even a short circuit. This is not as much of a concern for no-clean flux. No-clean flux contains minimal ionic material that is fully consumed when the flux is activated, or in other words, brought to soldering temperature. If all of the flux isn’t activated, like when you apply a lot of flux but only solder a small area, you still need to clean the PCB.

Articles

CircuitWorks Tacky Flux: Use and Working Conditions

CircuitWorks Tacky Flux: Use and Working Conditions

Tacky fluxes are commonly used in the electronics assembly industry for a variety of applications. These fluxes generally have honey-like consistency and can be used for ball attach applications, BGA re-balling and hand soldering applications. CircuitWorks No-Clean Tacky Flux (part #CW8500) is a mil...
Read This Post
How to Identify and Solve Thermal Stress Issues in Solder Joints

How to Identify and Solve Thermal Stress Issues in Solder Joints

Repeated thermal cycling induce thermal contractions and expansions in these electronics assemblies including the substrate of PCB, components and solder joints. Rapid contractions and expansions may cause thermomechanical fatigue, which results in deformation of solder and subsequently degradation ...
Read This Post
Choosing The Best Flux for High Quality Electronic Soldering

Choosing The Best Flux for High Quality Electronic Soldering

When joining two metals in a soldering process, like used in PCB assembly, flux is required to achieve a true metallurgic bond. That ensures the solder joint doesn’t crack or come loose even with the day-to-day wear-and-tear. This article covers the types of fluxes available, the advantages and disa...
Read This Post
Why Flux Pens Make PCB Repair Easier

Why Flux Pens Make PCB Repair Easier

Flux pens are an excellent way to dispense flux for benchtop soldering, its a high precision method of applying flux during PCB repair and rework.
Read This Post
You did not finish submitting your information to request a sample