Fiberwash AQ Fiber Optic Cleaning Pen
Request a Sample

Your Sample Request

Fiberwash AQ Fiber Optic Cleaning Pen

*=required field

Fiberwash AQ Fiber Optic Cleaning Pen

FOCCUS Fiberwash AQ Precision Fiber Optic Cleaning Pen contains a nonflammable, water-based cleaning solution that quickly and safely cleans the end face of fiber optic connectors, splices and ribbons. It also dissipates static charge, which prevents attracting airborne contamination that cling to the end face surface. The cleaning formulation has low odor, is plastic safe, and residue free. Because it is water-based, it has the environmental benefits of low VOC and GWP (Global Warming Potential). This non-pressurized container can be easily and safely transported. For best results, use with the QbE® Cleaning Platform  or CCT™ Clean Connect Tool and the Combination Cleaning process.

Features & Benefits

  • Nonflammable aqueous cleaner
  • Removes a broad range of soils: dust, oils, soils, complex soils, salts and other contaminants
  • Residue free, low VOC, low global warming potential (GWP)
  • Cleans alone or in combination with cleaning platforms, CCT™ tools or swabs
  • Cleans and eliminates electrostatic deposits of airborne contaminants
  • Completely portable — controlled dispensing of cleaning solution

Applications

  • Cleans UPC and APC 2.5mm SC (types), 1.25mm LC (Types), MT-Type, and all military end face connections
  • Removes handling and environmental soils from optical interfaces and back planes in conjunction with Coventry® brand precision swabs
  • Removes contaminants from transmitters, amplifiers and transceivers, Buffer gel from connectors and end faces
Shelf Life 2 yrs.
Shipping Name Consumer Commodity ORM-D

Articles

Overcoat Pen Can Lock Together Connector and Lock Out Moisture

By Edward J. Forrest, Jr., rMS™ Protection of high value connectors is far less expensive than replacement. At what point does fretting create signal loss? Best practice prevents it in the first place. The electronics industry has long used ‘gold finger protectants’ to reduce t...
Read This Post

Ultimate Guide to Cleaning Electronics

White residues can generally be cleaned by a flux remover. If the residues are the result of insufficient solvency of the original cleaning process, a stronger solvent cleaner may be required. Often agitation is required to remove the residues, which may include a wipe, swab, brush, or an aeroso...
Read This Post

The Combination Cleaning™ Guide for Fiber Optic Connector Cleaning

There’s a dirty little secret in the fiber optics world. Many installers use cleaning methods that when inspected under a scope, show a great deal of contamination left behind. Unless they inspect 100% of their connections, they take the chance of reduced signal strength cutting back on ...
Read This Post

How to Restore Flood Damaged Electronics, Telecom Equipment, and Fiber Optic Connectors

Although water can cause extensive damage to electronics, it does not mean that equipment is lost and cannot be replaced. Electronics, telecommunications equipment, and fiber optic connections are able to be restored after water damage. The damage can be reversed using cleaning solutions that...
Read This Post

Swipe to View Add to Cart Button 

Part # Size Units Per Case Price Per Case Add To Cart
FW2190

5g / 0.2 oz.

12 pens $140.04
FW2190BLK

5 g pen

25 $271.00
You did not finish submitting your information to request a sample