Blog Heading

Cleaning Study Optimizes Reliability and Bandwidth of Fiber Optic Connections

As telecommunications companies upgrade and expand their fiber optic networks networks and plan for Fiber-To-The- Home (FTTH) to accommodate high speed Internet access, the need for an effective, repeatable and cost-effective means of cleaning...
Read This Post

HOW-TO: Remove Solder Bridging from J-Leads & Gull Wing Leads

Note: This guide is based on the IPC 7711 6.1.2.1 and 6.1.4.1 standards. Purchase the full standard from the IPC organization. The graphics and text have been created to provide easy-to-use instructions. Any content that diverges or supplements...
Read This Post

HOW-TO: Remove Excess Solder from SMT Land or BGA with Wick & Blade Tip

Note: This guide is based on the IPC 7711 4.4.1 standard. Purchase the full standard from the IPC organization. The graphics and text have been created to provide easy-to-use instructions. Any content that diverges or supplements the IPC standard...
Read This Post

HOW-TO: Desolder & Remove Thru-Hole Component with Solder Wick

Note: This guide is based on the IPC 7711 3.1.5 standard. Purchase the full standard from the IPC organization. The graphics and text have been created to provide easy-to-use instructions. Any content that diverges or supplements the IPC standard...
Read This Post

Tri-V Cleaning Solvent Performance Evaluation

Qualifying a replacement cleaning chemistry can be a daunting task, as performance parameters are considered along with safety and regulatory issues. Changes in the regulatory environment can force these changes, and unfortunately many substitute...
Read This Post

Explainer Video of Cleaner Degreaser Application Methods

Need Help With Your Application? Enrique Francis efrancis@itwcce.com 678-928-6534 Hi, I’m Enrique Francis, the sales manager for bulk solvents at Chemtronics. Today I’m going to take you through the different methods of degreasing,...
Read This Post

Video Overview of Cleaner Degreasers

Need Help With Your Application? Enrique Francis efrancis@itwcce.com 770-424-4888 Hi, I’m Enrique Francis, the sales manager for bulk solvents at Chemtronics. Today I’m going to take you through the different methods of degreasing,...
Read This Post

HOW-TO: Remove Excess Solder from SMT Land with Wick

Note: This guide is based on the IPC 7711 5.7.3, 5.7.4, 5.7.5, and 5.7.6 standard. Purchase the full standard from the IPC organization. The graphics and text have been created to provide easy-to-use instructions. Any content that diverges or...
Read This Post

Halo Effect on Fiber Optic End Faces: Cause and Prevention

Haloing is a contamination defect that appears on fiber optic end face connections. If present, using a fiberscope to inspect an end face will reveal a discolored ring usually midway between the fiber core and the leading edge of the chamfer....
Read This Post

CircuitWorks Tacky Flux: Use and Working Conditions

Tacky fluxes are commonly used in the electronics assembly industry for a variety of applications. These fluxes generally have honey-like consistency and can be used for ball attach applications, BGA re-balling and hand soldering applications....
Read This Post

Electro-Wash QD Degreaser

Fast drying, nonflammable electronics cleaner degreaser

Coventry ESD Pre-Saturated Poly Wipes

Cleanroom wipes with Mat & Benchtop Reconditioner
You did not finish submitting your information to request a sample