To improve the connection quality of an electrical contact or switch, you can remove oxidation or rust either mechanically and/or chemically. A brass or steel brush is the most common method of scrubbing off oxidation, although for sensitive contacts nylon is also used. With this method, take care to avoid damaging contacts and other components. It can be difficult to directly clean all the tight areas of electrical connectors and switches, so you may need to use some kind of chemical method. On the mild side, a mild acid like vinegar can be used, and other agents are offered for battery terminal cleaning, such as baking soda. Regardless of the cleaning material, care should be taken to rinse it off. A cleaner strong enough to remove rust could continue to work on unintended metal surfaces.